-Donovan 5” Bore Space Block (10.505” Deck Height/1” Raised Cam/60MM Roller Cam Bearing)
-Callies Ultra Billet 5” Bore Space/5” Stroke Crankshaft
-GRP Aluminum Pro Series Connecting Rods
-Diamond Pistons w/ Trend DLC Coated Wrist Pins
-Total Seal Rings (.032” .032” 3.0MM Package)
-Clevite Coated H-Series Main and Rod Bearings
-Comp Cams Custom Spec Camshaft
-Jesel Belt Drive Timing System
-Jesel Tall Body Keyway Lifters (#53757)
-Smith Brothers Pushrods
-Jesel Rocker Arms (Intake Ratio 1.85/Exhaust Ratio 1.8)
-CFE Billet Symmetrical Heads w/ Matched CFE Intake Manifold
-Victory Coated Titanium Valves
-Exceldyne Retainers & Keepers
-PSI Valve Springs
-FlatOut Copper Head Gaskets
-Williams Fabrication Valve Covers
-Innovators West Crankshaft Damper & Crank Trigger Setup
-Moroso Dry-Sump Oil Pan w/ Dividers
-Peterson Fluid Systems R4 5-Stage Dry Sump Oil Pump
-Peterson Fluid Systems Dry Sump Oil Tank
-Dale Cubic Split Dominator Carburetor Setup w/ Braswell Sheer Plates
-Jesel Front Drive Distributor
Comes with headers, spare valve springs, spare pushrods, spare rocker arms, jets for carbs, valve spring removal tool and hood scoop.
Last ran in A/A and went 6.52 @ 211mph. Motor was built by Marc at Advanced Engine Machine in Salina, KS.
$37,500
Call Michael at 417-437-1669 with any questions.
-Callies Ultra Billet 5” Bore Space/5” Stroke Crankshaft
-GRP Aluminum Pro Series Connecting Rods
-Diamond Pistons w/ Trend DLC Coated Wrist Pins
-Total Seal Rings (.032” .032” 3.0MM Package)
-Clevite Coated H-Series Main and Rod Bearings
-Comp Cams Custom Spec Camshaft
-Jesel Belt Drive Timing System
-Jesel Tall Body Keyway Lifters (#53757)
-Smith Brothers Pushrods
-Jesel Rocker Arms (Intake Ratio 1.85/Exhaust Ratio 1.8)
-CFE Billet Symmetrical Heads w/ Matched CFE Intake Manifold
-Victory Coated Titanium Valves
-Exceldyne Retainers & Keepers
-PSI Valve Springs
-FlatOut Copper Head Gaskets
-Williams Fabrication Valve Covers
-Innovators West Crankshaft Damper & Crank Trigger Setup
-Moroso Dry-Sump Oil Pan w/ Dividers
-Peterson Fluid Systems R4 5-Stage Dry Sump Oil Pump
-Peterson Fluid Systems Dry Sump Oil Tank
-Dale Cubic Split Dominator Carburetor Setup w/ Braswell Sheer Plates
-Jesel Front Drive Distributor
Comes with headers, spare valve springs, spare pushrods, spare rocker arms, jets for carbs, valve spring removal tool and hood scoop.
Last ran in A/A and went 6.52 @ 211mph. Motor was built by Marc at Advanced Engine Machine in Salina, KS.
$37,500
Call Michael at 417-437-1669 with any questions.
