ISO Crankshaft

[Mike Crutchfield]

Looking for a crank 2.850 with Honda rod size or 2.0 in. or something very close. What's out there? let me know
Thanks
Mike Crutchfield
Call or text
334 three two zero 2 six six 4

 

[Adger Smith]

Price Crank Stroke Main Rod Comments
$850.00 Llunati 2.775 2.990 1.890
$450.00 Steel Core 2.820 2.300 1.880 1178 GM BJ327 Forged
$450.00 Steel Core 2.750 2.449 2.000 Cross drilled after market core
$400.00 GM 2.755 2.419 (.030) 2.000 (.020) 1178 GM 327 BJ Core
$600.00 GM 3.000 2.299 1.999 3735236 Steel GM Knifed edged
$900.00 Cola 3.240 2.299 1.999 SBC snout
$1,500.00 Winberg 3.270 2.299 1.888 Light wt; gun drilled; center counter weights; bb shout
$1,500.00 Bryant 3.270 2.998 1.850 IRL Bearing Lt wt; gun drilled

 

[Mike Crutchfield]

Price Crank Stroke Main Rod Comments
$850.00 Llunati 2.775 2.990 1.890
$450.00 Steel Core 2.820 2.300 1.880 1178 GM BJ327 Forged
$450.00 Steel Core 2.750 2.449 2.000 Cross drilled after market core
$400.00 GM 2.755 2.419 (.030) 2.000 (.020) 1178 GM 327 BJ Core
$600.00 GM 3.000 2.299 1.999 3735236 Steel GM Knifed edged
$900.00 Cola 3.240 2.299 1.999 SBC snout
$1,500.00 Winberg 3.270 2.299 1.888 Light wt; gun drilled; center counter weights; bb shout
$1,500.00 Bryant 3.270 2.998 1.850 IRL Bearing Lt wt; gun drilled

Adger
Good to hear from you. Those are not close enough but thanks anyway.
Thanks
MC

 

[Robin D Rogerson]

Price Crank Stroke Main Rod Comments
$850.00 Llunati 2.775 2.990 1.890
$450.00 Steel Core 2.820 2.300 1.880 1178 GM BJ327 Forged
$450.00 Steel Core 2.750 2.449 2.000 Cross drilled after market core
$400.00 GM 2.755 2.419 (.030) 2.000 (.020) 1178 GM 327 BJ Core
$600.00 GM 3.000 2.299 1.999 3735236 Steel GM Knifed edged
$900.00 Cola 3.240 2.299 1.999 SBC snout
$1,500.00 Winberg 3.270 2.299 1.888 Light wt; gun drilled; center counter weights; bb shout
$1,500.00 Bryant 3.270 2.998 1.850 IRL Bearing Lt wt; gun drilled

 

[Robin D Rogerson]

Adger Smith, is Winberg sbc 3.27 crankshaft still available ? call or text Robin @863-287-5888

 

[Dan Soran]

Looking for a crank 2.850 with Honda rod size or 2.0 in. or something very close. What's out there? let me know
Thanks
Mike Crutchfield
Call or text
334 three two zero 2 six six 4

I have a 2.9 crankshaft specialties with a 2 inch pin

 

[C29404]

Adger Smith, is the 2.820 crank still available? If so call 704-888-6362 8-5 M-F
Thanks, Mike

 

[Adger Smith]

Adger Smith, is the 2.820 crank still available? If so call 704-888-6362 8-5 M-F
Thanks, Mike

Mike.
I think that crank is still in the rack.. I will check tomorrow(Friday) and give you a call
Thanks, Adger

 

[Gary Hocking]

I have a 2.9 crankshaft specialties with a 2 inch pin

Hi,do you still have the 2.900?

 

[Al Reed]

Price Crank Stroke Main Rod Comments
$850.00 Llunati 2.775 2.990 1.890
$450.00 Steel Core 2.820 2.300 1.880 1178 GM BJ327 Forged
$450.00 Steel Core 2.750 2.449 2.000 Cross drilled after market core
$400.00 GM 2.755 2.419 (.030) 2.000 (.020) 1178 GM 327 BJ Core
$600.00 GM 3.000 2.299 1.999 3735236 Steel GM Knifed edged
$900.00 Cola 3.240 2.299 1.999 SBC snout
$1,500.00 Winberg 3.270 2.299 1.888 Light wt; gun drilled; center counter weights; bb shout
$1,500.00 Bryant 3.270 2.998 1.850 IRL Bearing Lt wt; gun drilled

Adger, you have a PM.

 

[Adger Smith]

Adger, you have a PM.

Got it, you have E-mail