30 years of comp parts under the bench

Discussion in 'InsideCompRacing.com Classifieds' started by nhracea1, Apr 13, 2018.

  1. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
    PUSHRODS:
    TREND 8.425/ 7/16 DOUBLE TAPER/ 165 WALL/ 18 PIECES $200
    TREND 8.300/ 7/16 DOUBLE TAPER/ 165 WALL/ 17 $200
    TREND 8.150/ 7/16 DOUBLE TAPER/ 165 WALL/ 15 $200
    TREND 8.275/ 7/16 DOUBLE TAPER/ 165 WALL 7 $80
    COMP CAM 8.450 7/16 DOUBLE TAPER 125 WALL/ 2 $20
    COMP CAM 8.100 7/16 DOUBLE TAPER 125 WALL/ 19 $100
    PISTON PINS:
    TREND 930X2.250X175WALL 8 PIECES $200
    CAMS :
    BULLET 307/327/276/288/15 .508/.480/55MM:$200
    BULLET 309/324/276/286/15 .535/.513/55MM NEW: $350
    BULLET 307/327/276/288/15 .506/.480 55MM: $200
    BULLET 306/333/274/291/13 .500/.480 55MM NEW: $350
    ALUMINUM RODS:
    BME 265 5.690 467GMS 927PIN SMALL SBC CRANK: $150
    BME 327 5.690 567GMS 927PIN SMALL SBC CRANK: $100
    GRP 1400 5.650 446GMS 866PIN HONDA CRANK: $200
    GRP 1400 5.600 446GMS 927PIN HONDA CRANK: $200
    PISTONS:
    BME 66 4.060 1.180CH 043/043/3MM REBCO DOME&TOP RING 930/2.250PIN DOUBLE SPIROLOCKS 396GMS CFE SMALL PORT WEDGE 8USED&2NEW PISTONS COATED TOPS&SKIRT $500
    BME 66 4.060 RONS PORTING SERVICE DOME 043/043/3MM 927/2.250 PIN 410GMS DOUBLE SPIROLOCS COATED SKIRTS 9 PIECES FOR SBC WEDGE $300
    JE BOX 4.060 1.175CH 930/2.250 PIN CFE SMALL PORT COATED SKIRT DOUBLE SPIROLOCKS 9 PIECES $500
    JE BOX 4.060 1.175CH 927/2.250 PIN 043/043/3MM CFE SMALL PORT 10 PISTONS NEW SBC WEDGE
    MANIFOLDS:
    HRE BILLET FOR 8.150 DECK CFE SINGLE TOP $1000
    CONVERTERS
    A-1 7IN/AE300-8 $400
    A-1 7IN/A 300-12 $400
    TIT VALVES:
    11/32/5.55/2.100 AND 1.660 WITH STEEL TIPS 8 EACH $100
    VALVE SPRINGS:
    2 SETS KMOTION K1000 DOUBLE WITH RETAINERS10*AND SPRING SEATS
    3 SETS PSI 1248 1.625 325LBS@2.190
    1 PAC 1355H 350/375/2.200
    1SET COMP CAM 948 NEW
    1SET COM CAMS 948 WITH RETAINERS AND SPRING SEATS
    JESEL ROCKERS:
    SBC 15*/.250 MOHAWK WEDGE 1.7(CABL)/1.6(CABL) STAND 20107 roller bearings in tip rollers USED 6 DYNO PULLS ONLY: $750
    MISC PARTS:
    MOROSO COOL CAN WITH #6 FITTING #65125 $25
    REAR COIL SPRINGS 3.25OD 12"TALL 85 AND 120 LBS $25
    MOROSO CRANK TRIGGER OLD AS THE HILLS $25
    TCI FLEXPLATE SHIELD $25
    CSR CARBON FLEXPLATE SHIELD $100
    STEF'S BREATHER CAN WITH #10 FITTING
    MSD #8980 #8950 #8739
    PPP TITANIUM 10* 5/16 VALVE LOCKS SQUARE LOCK NEW $50
    MANLEY STEEL 10* 5/16 VALVE LOCKS NEW 31PIECES
    DRIVERS SIDE STARTER ADAPTER COVERS OIL FILTER HOLE SBC $30
    PETERSON SCAVENGE FILTER #12 PART# 09-O403 $50
    LSM LIFTER BRONZE BUSHINGS 903ID/1.065OD/1.600LENGTH NEW $50
    TITANIUM PISTON PINS 2.25/927/170 $200

    NO TIRE KICKERS,NO PRICES JUST BE REASONABLE,CALL OR TEXT 865-679-6352
    LONG LIST WILL ADD PRICES LATER IF NO ONE MAKES REASONABLE OFFER
     
    #1 nhracea1, Apr 13, 2018
    Last edited: Jul 19, 2018
  2. toolmakeron

    toolmakeron New Member

    Joined:
    Apr 11, 2016
    Messages:
    3
    Likes Received:
    0
    Any chance you might have a lifter valley cover for a Spider intake, GM "363" heads.Price on 5.850 BME rods, also price on the Ti , 5/16 stem valves, please. Thanks Ron
     
  3. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
    Rods $100.00
    Valves $200.00 for intake and exhaust
     
  4. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
    bump to top
     
  5. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
     
  6. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
  7. john72nova

    john72nova New Member

    Joined:
    Jun 25, 2018
    Messages:
    25
    Likes Received:
    1
    how much for the ol 948 in the box?
     
  8. Tracy Robbins

    Tracy Robbins Member

    Joined:
    Aug 1, 2007
    Messages:
    54
    Likes Received:
    0
    Do you have pics of the drivers side starter adapter? Who is the manufacturer?
     
  9. racefab57

    racefab57 Member

    Joined:
    Nov 8, 2011
    Messages:
    53
    Likes Received:
    1
    Can I get the specs on the Kmotion K 1000 v. springs,retainers,Price too.

    David Rockell.
     
  10. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
     
  11. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
    send me a email or phone # and I will send a picture it was made by Steph's the oil pan people
     
  12. nhracea1

    nhracea1 Member

    Joined:
    Jan 19, 2006
    Messages:
    42
    Likes Received:
    1
    will check them tonight and let you know springs retainers and spring seats $100 plus freight
     
  13. racefab57

    racefab57 Member

    Joined:
    Nov 8, 2011
    Messages:
    53
    Likes Received:
    1

Share This Page