Steel rockers, rods, valves, pins, piston rings, lifters, head gaskets

Discussion in 'InsideCompRacing.com Classifieds' started by Bret Schlichtig, Jun 13, 2018.

  1. Bret Schlichtig

    Bret Schlichtig New Member

    Joined:
    Dec 9, 2012
    Messages:
    12
    Likes Received:
    0
    Make offer on all parts. Email bret@blackarrowracing.com

    9-Jesel Steel rockers 4- 2.00" pivot length and 5- 2.050" pivot length

    New Rods
    8 MGP SB1600 /5.535" long/2.015 housing/.927 pin/.940 width
    8 MGP PRO1950/6.050" long/2.015 housing/.990 pin/ .993 width
    7 MGP PRO1950/6.100" long/2.0145 housing/ 1.031 pin/.990 width
    8 MGP PRO1900/6.095" long/2.0145 housing/ 1.031 pin/ .993 width

    Valves
    2- Xceldyne 2.320" dia/ 6.350" long/ 7mm/ .250 tip CRN coated
    6- Xceldyne 2.300" dia/ 6.200" long/ 7mm/ .250 tip CRN coated
    4- Victory 2.300" dia/7mm/ 6.200 long/ 7mm/ .250 tip DLC coated
    1- Del West 2.280" dia/ 6.100 long/ .310 stem/ .300 tip DLC coated
    1- 1.625" dia/ 6.090 long/ .310 stem/ .300 tip
    1- Victory 1.625" dia/ 6.100/ .310 stem/ .300 tip

    Wrist Pins
    2- Diamond .868"x 2.250 DLC chamfered
    7- Diamond .875 x 2.250 DLC chamfered- 3 new/4 used
    5- Precision Products .930 x 2.950
    8- Wiseco .990 x 2.930
    8- Precision Products.927 x 2.500 Tapered DLC
    3- Diamond .866 x 2.250 DLC chamfered
    4- Diamond .927 x 2.250 DLC chamfered
    7- .992 x 2.750 DLC chamfered
    8- .990 x 2.750 DLC chamfered 1 new/ 7 used
    8- Wiseco .927 x 2.500
    8- .990 x 2.750 DLC tapered chamfered
    1- Diamond .931 x 2.250 DLC chamfered
    3- Diamond .929 x 2.250 DLC chamfered 1 new/ 2 used
    4- Diamond .868 x 2.250 DLC chamfered- used
    2- Diamond .872 x 2.250 DLC chamfered-used
    4- Diamond .866 x 2.250 DLC chamfered- used
    7- Diamond .927 x 2.250 DLC chamfered- used

    Total Seal Piston rings
    4.310-4.320 bore

    8- Total Conform 4.320 x .0325 x .135 C-23 top rings
    4- 4.310 x .0325 x .125 Napier 2nd
    4- 4.315 x .0325 x .135 C-72 top rings
    4- 4.320 x .0325 x .135 C-23 top rings
    32- 4.310 x .018 x .145 oil rings
    4- 4.310 3mm expanders
    16- 4.310 x .018 x .102 non chrome rails

    4.250 bore
    2- 4.255 x .0276 x .110 C-72 top ring
    9- 4.255 x .0276 x .110 C-23 top ring
    16- 4.260 x .0272 x .108 Napier 2nd

    Misc Rings
    1- 4.205 x .0276 x .110 C-23 top ring
    6- 4.180 x .0430 x .140 Napier 2nd
    4- 4.180 x .0274 x .131 C-23 top ring


    Lifters
    5- .937 keyway lifters centered with .785 wheel- 4 new, 1 like new

    Head Gaskets
    6-FELPRO 4.340" Bore/ 4.500 bore space/ .041 thick
    3-Cometic 4.280 bore/ 4.500 bore space/ .030 thick
    3-FELPRO 4.280" bore/ 4.500 bore space/ .041 thick
     

Share This Page