Inside Comp Racing Forum - Recent Topics

Looking for a 6.33 Gear

TC5233 — Wed, 25 Mar 2026 23:15:45 +0000

Looking for a 6.33 gear, if you have one for sale or know of one, please let me know. Taylor Chomiski (8zero6) - 57zero - 12zero7

Parts

CDodd4615 — Wed, 25 Mar 2026 01:20:33 +0000

15"x12" Bogart Force 5 Wheels (5x 4 3/4 and 4" BS) with Goodyear 33x12x15 D1288 Tires

Goodyear 33x12x15 D1288 Tires

Brand New PPP Profilte Shifter- Forward Pattern (Push), Front Exit Cable- $525

9" 5.57 Rear End with Lamb Pinion Support- Set Up by Indy Gear- $2,500

9" 5.50 Ring and Pinion

Brand New Stefs Dry Sump Tank (Tall)

PRC Holley 4779 750 Comp Carburetor

Holley 4779 750 Comp Carburetor

2- Proflite PPP 660 Aluminum Shifter Cable Bracket- $70 Each

Pro 1 Safety Seat Belts w/ Elite Adjusters - Wrap Around Belts (Needs Recert)

4- 7" Steel Coan/Schneider Converters (Built for C/ED)- $300 Each

Sarmento Racecars Comp Dragster Rear End Housing w/ Mark Williams Axles & Caliper Brackets

Magnafuel Quickstar 300-$200

Magnafuel Inline Filter-$100

XS 16V Battery-$200

PDS AirHub-$300

V300 w/ Harness and DS Sensor/Collar (Needs SD Cartridge Reader)

Racepak VNet Gauges- RPM, Oil Pressure, Water Temp

I will be adding to the list, and updating as I figure out prices. But if you see something you're interested in, let me know

Chris Dodd- 214-315-0300

ISO JESEL BELT DRIVE & DIST FOR SBC

mfracer — Fri, 20 Mar 2026 23:33:25 +0000

Looking for a low use Jesel belt drive & dist for std deck SBC.

What's out there before I call Jesel for a new one

Mike Foster

605-690-5585

Roger brogden

Garyjacobson — Fri, 13 Mar 2026 23:36:31 +0000

Just wanted to say thank you to Roger for everything he does for this class and has done for this class being a long time comp racer and fan did as greatly appreciated so thank you Roger for everything you do for competition eliminator

ISO MSD 8998 Ignition Tester

Podo — Thu, 12 Mar 2026 08:05:30 +0000

In search of MSD 8998 Ignition Tester. Old style should also be okay for my application.

Also, looking for pressure ring/hat for an Ace 7 inch clutch.

Thanks,

Dave

724-255-8011

2007 McKinney 245” Dragster

723comp — Tue, 10 Mar 2026 21:22:02 +0000

Murf McKinney 245” Chassis

Chassis Number: 121-0317 (April 2007)

*Former Browell Dragster*

Current NHRA Cert

Simpson Camlock Belts (December 2026)

Magnesium Lightweight Body with Carbon Fiber Air Ducts

Carbon Fiber Seat with RaceTech Pad

Ultra Light Weight Car

Rear End:

Titanium Housing with 12 Bolt Aluminum Drop Out, 4.88 Gears with Strange Spool and Axels

2 Spare Sets of Axels (One set has been Gun Drilled)

Strange Carbon Fiber Brakes

Simpson Parachute

Extreme Fab Beadlock Wheels

Ignition System:

MSD Power Grid System with controller (PN: 77303)

HVC 2 Coil

K&R Fused Wiring Harness with 6 Channel Rocker switch

Just In Time Trans Brake

Racepak V300 with IQ3 Dash

Racepak AF4 with Sensors

TurboStart S12V1200

(2) TurboStart S12V925

XS Power S1600

Fuel and Oil:

2 Gallon Fuel Cell

Magna Fuel 300 Quick Start Fuel Pump

System 1 Oil System with pressure sensor

Transmission/ Shifting:

Will Accommodate a GM Powerglide with Small Block

Precision Air Shifter with Regulator

Dewzen Transmission Overflow

Meziere Water Pump with Sensor

Extras:

CFM Fabrication Cage Mounted Aluminum Tool Tray

Aluminum Drip Pan for Engine

Dragster Dolly

Wheelie Bar

Miscellaneous Stainless Lines and Bolts

Additional Weight upon request

$14,000 obo need space and need it gone!

ISO Carbon Rear Brakes

Terry Snyder — Tue, 10 Mar 2026 19:23:27 +0000

ISO Carbon Rear Brakes for 5" Bolt Circle, 5/8" studs, for Olds/Pontiac housing ends.

What's out there??

Terry Snyder

You can call or text 620-755-2119

ISO SBC Parts

Mark Forbes — Mon, 09 Mar 2026 14:47:18 +0000

ISO

- 23* sheetmetal manifold

-Stahl pattern down swept headers for altered/dragster

- SBC CSI waterpump, black

Let me know what you might have. 3 zero 3 - 5 zero seven- one 8 3 one

Racepak Data Logger and other stuff

Podo — Tue, 24 Feb 2026 12:39:48 +0000

Racepak Sportsman Data Logger - with cables and collar. - $600.

Racepak EGT's for SBC: 1-3-5-7 and 2-4-6-8. - $700 each.

Autometer 5" monster tach w/shift light- 11,000 rpm face; playback; adj shiftlite per gear. - $200

Autometer Pro-Comp UltraLite gauges - 2-5/8" face - silver: oil pressure, coolant temp (electric), battery voltage, vacuum and brake pressure. - $200/set.

PAC 1360 valve springs - never used - 2 sets of 16: $400 per set.

Ace 8" single or dual disc clutch: fits Chevy; 142 tooth flywheel; 1 year left on cert. - $1500.

Patterson 4.067 pistons, coated pins, and 5.200 aluminum rods for 8.200 wedge block. Needs 2.940 crank for 305 cubic inch. Dyno time only. $1000.

Buyer pays shipping.

Call or text for photos or additional information.

Dave Podobinski

724-255-8011

D4 Parking

Bliss Hudson — Tue, 17 Feb 2026 21:03:19 +0000

D4 will have assigned parking this year

Please let Rodger Brogdon know if you are attending an event beforehand so he can make sure you get a good spot!