Honda S2000 Engine. F20. 122 cubic inches. Recently freshened up. New o-rings, head gasket, bearings, pistons and valves.
Reason for selling : we are moving to a different class and will be running a V8 instead
Can race in DD/AT at 2000 or I/D at 1500. Has gone 6.71 in DD/AT trim. That is .870 under the current DD/AT index with more in it.
InlinePRO sleeved and oringed block
InlinePRO Xtreme Power Rods w/ 7/16” rod bolts
CP Pistons HD version with upgraded pins
L19 head studs
InlinePRO built head
InlinePRO cams
Ferrea roller rockers
Toda adjustable cam gears
InlinePRO timing chain tensioner
Super tech 6.6 inconel exhaust valves
Super tech stainless intake valves
PSI dual valve springs (exhaust)
InlinePRO dual valve springs (intake)
InlinePRO Ti retainers
Pro Jay 90mm billet throttle body
Kinsler Intake Manifold w/ dual -12 fuel rails
(8) ID2000 injectors
Nth Moto tubular turbo manifold wrapped in inconel heat shield with 4 EGTs and 4 UEGOs
Nth Moto downpipe and wastegate dump
Turbosmart waste gate w/position sensor
(2) Turbosmart blow off valves
(3) mechanical injection nozzles in turbo pipe w/ NX methanol solenoid and lines
Earls Ultra650 Kevlar hoses
Weldon fuel pressure regulator and filter
Brand New Garrett GTX5020R Gen2 76mm turbo
Oil feed and drain lines
Backpressure sensor and line
4 Egt's in manifold
4 UEGO sensors in manifold 1 in downpipe
Oil distribution manifold
Custom valve cover with (4) smart coils mounted, plug wires and custom hold downs
Some pictures can be seen by clicking this link. Have many more if needed/wanted
https://share.icloud.com/photos/0enwwbnX5-B24a-CZajaZjAwg
$19.5k and will deliver or meet within a 1-2 state range of Indiana.
Reason for selling : we are moving to a different class and will be running a V8 instead
Can race in DD/AT at 2000 or I/D at 1500. Has gone 6.71 in DD/AT trim. That is .870 under the current DD/AT index with more in it.
InlinePRO sleeved and oringed block
InlinePRO Xtreme Power Rods w/ 7/16” rod bolts
CP Pistons HD version with upgraded pins
L19 head studs
InlinePRO built head
InlinePRO cams
Ferrea roller rockers
Toda adjustable cam gears
InlinePRO timing chain tensioner
Super tech 6.6 inconel exhaust valves
Super tech stainless intake valves
PSI dual valve springs (exhaust)
InlinePRO dual valve springs (intake)
InlinePRO Ti retainers
Pro Jay 90mm billet throttle body
Kinsler Intake Manifold w/ dual -12 fuel rails
(8) ID2000 injectors
Nth Moto tubular turbo manifold wrapped in inconel heat shield with 4 EGTs and 4 UEGOs
Nth Moto downpipe and wastegate dump
Turbosmart waste gate w/position sensor
(2) Turbosmart blow off valves
(3) mechanical injection nozzles in turbo pipe w/ NX methanol solenoid and lines
Earls Ultra650 Kevlar hoses
Weldon fuel pressure regulator and filter
Brand New Garrett GTX5020R Gen2 76mm turbo
Oil feed and drain lines
Backpressure sensor and line
4 Egt's in manifold
4 UEGO sensors in manifold 1 in downpipe
Oil distribution manifold
Custom valve cover with (4) smart coils mounted, plug wires and custom hold downs
Some pictures can be seen by clicking this link. Have many more if needed/wanted
https://share.icloud.com/photos/0enwwbnX5-B24a-CZajaZjAwg
$19.5k and will deliver or meet within a 1-2 state range of Indiana.
Last edited:
