Toggle sidebar Toggle sidebar

Hancock and Lane parts for sale

Jeff Lane

Jeff Lane

Active Member
Dec 24, 2009
247
41
28
Seattle area
316" SBC engine complete manifold to pan, starter, flex plates, etc. Ready for your carb and headers. The engine has the best pieces you can buy. Slawko wedge heads, short deck Aurora block, large roller cam bearings, Dailey Pump, Jesel, CP, Slawko, HRE, and was just freshened with new everything. This engine before updates has run 8.59 / 156 mph @ 2850 lbs. Available at the Winternationals in Pomona. $20K

4 each 7" torque converters for 300" - 358" engine sizes. $500 each

40 sets used PAC springs all with great pressure. 1356, 1355, 1357 $100 set

10 sets of Racepak 2 magnet collars and pick-ups. $50.00 for a pair.

New Sprung mounted bolt on wheelie bar springs and sliders $100 for the pair

1 New 153 tooth lightweight flex plate from Meziere made from billet and nutsert option (no nuts on back side) $250

20+ large journal camshafts. Call for pricing.

7 sets titanium valves. Call for sizes.

8 sets Aluminum rods all 30 runs or less for 1.88 and 1.77 journals. $400 set.

6 turbo start batteries. Lightweight and standard 16V. $75 each + shipping

Ring and Pinions: 5:57, 5:67 ratios / Coated and lightened $350

Many sets of wrist pins, titanium retainers, used radial M/T tires, SB-2 and Wedge Pistons, MSD parts

Jeff Lane
Hancock and Lane Racing
206-818-1804
hancockandlane.com
 
Last edited:
Jeff,

What trans does the torque convertors work with?

Smitty




Jeff Lane said:
316" SBC engine complete manifold to pan, starter, flex plates, etc. Ready for your carb and headers. The engine has the best pieces you can buy. Slawko wedge heads, short deck Aurora block, large roller cam bearings, Dailey Pump, Jesel, CP, Slawko, HRE, and was just freshened with new everything. This engine before updates has run 8.59 / 156 mph @ 2850 lbs. Available at the Winternationals in Pomona. $20K

4 each 7" torque converters for 300" - 358" engine sizes. $500 each

40 sets used PAC springs all with great pressure. 1356, 1355, 1357 $100 set

10 sets of Racepak 2 magnet collars and pick-ups. $50.00 for a pair.

New Sprung mounted bolt on wheelie bar springs and sliders $100 for the pair

1 New 153 tooth lightweight flex plate from Meziere made from billet and nutsert option (no nuts on back side) $250

20+ large journal camshafts. Call for pricing.

7 sets titanium valves. Call for sizes.

8 sets Aluminum rods all 30 runs or less for 1.88 and 1.77 journals. $400 set.

6 turbo start batteries. Lightweight and standard 16V. $75 each + shipping

Ring and Pinions: 5:57, 5:67 ratios / Coated and lightened $350

Many sets of wrist pins, titanium retainers, used radial M/T tires, SB-2 and Wedge Pistons, MSD parts

Jeff Lane
Hancock and Lane Racing
206-818-1804
hancockandlane.com
Click to expand...
 
nickh said:
Jeff
Called and left a voice mail last week on converter and MSD parts
Click to expand...

Sorry for the slow reply...I didn't get your voice message and we have been thrashing to get ready for the Winternationals.....If you want to try again, please call on my cell 206-818-1804
 
Perfect sets of used Titanium Valves:


V-8 sets / $200 per set of eight

Intake

8 - 7mm - 2.150 x 5.780 x .250 tip

16- 7mm - 2.230 x 5.940 x .250 tip

16- 7mm - 2.230 x 5.950 x .250 tip

8 - 5/16 - 2.150 x 5.550 x .250 tip square groove

8 - 5/16 - 2.180 x 5.635 x .300 tip


Exhaust

8 - 5/16 - 1.595 x 5.770 x .250 tip

16- 5/16 - 1.600 x 5.775 x .250 tip

8 - 5/16 - 1.600 x 5.775 x .300 tip

8 - 5/16 - 1.600 x 5.780 x .250 tip



4 and 6 cylinder sets (new and used) $100 4 cyl / $150 6 cyl

Intake

4 ea. 7mm - 2.150 x 5.550 x .250 tip

6 ea. 7mm - 2.150 x 5.780 x .250 tip

7 ea. 7mm - 2.180 x 5.795 x .250 tip

6 ea. 5/16 - 2.225 x 5.885 x .180 tip


Exhaust

5 ea. 5/16 - 1.625 x 5.640 x .300 tip square groove

7 ea. 5/16 - 1.600 x 5.750 x .180 tip

4 ea. 5/16 - 1.600 x 5.775 x .250 tip

5 ea. 5/16 - 1.600 x 5.780 x .300 tip
 
You must log in or register to reply here.
Top Bottom
Back