All parts are used in good working order. Most of them removed from running vehicles with no issues.
Pics are available. Prices do not include shipping.
Call shop. 614-471-1022
[email protected]
2.) MSD Boost Controller PN 7562 $150
- No solenoids or solenoid power harness
- No dome pressure sensor
- These items easily available
3.) Big Stuff 3 Gen 3 Engine Management System $1500
- BS3-004-007
- DAI, DAE
- GM V8
- Complete harness with O2 sensor and serial COMM cable
4.) Complete Rear End Setup $1200 for all
- Competition Engineering Sheet metal Mild Steel housing
- 39 3/4" End to End
- 1/2" Pass offset
- Early Big Ford Ends
- Ladder Bar mount centers 25 3/8" $600
- Moser 35 Spline axles with bearings installed
- 4 3/4" B.C.
- Early Big Ford
- 5/8" screw in studs with lug nuts $250/pair
- Moser 35 Spline steel spool
- PN 5S9F35 $150
- Wilwood Early Big Ford Rear Brake Kit $350
5.) Aeromotive EFI Regulator -10 AN $150
6.) Aeromotive Fuel filter element for -12 AN filter 100 micron $50
7.) Autometer Sport Comp (Black) Monster recall Tach $175
8.) Autometer Sport Comp 2 5/8" Mechanical Gauges $40 each/ $100 takes them all
- 0-100 PSI Oil Pressure
- 0-35 PSI Boost
- 0-280 F Oil Temp
9.) MSD Pro Power Coil PN 8201 $100
10.) Richmond 4.56 12 Bolt 8620 Gear $150
11.) Richmond 5.83 PRO gear. 20 runs since new. $400
13.) Bosch 160 lb/hr low impedance EV1 plug injectors. Set of 8 $600
14.) Billet Atomizer 225 lb/hr injectors. Set of 8 $1000
15.) Aluminum fuel cell. Black. 10 gallons. $175
- 17" x 17" x 9" tall. -10 AN dual outlet. -10 AN vent and return.
- Sender installed
19.) Axles and brakes. Need to go together because calipers brackets are installed on axles
- Strange 35 spline race axles
- for 37 5/8" end to end housing. Centered pinion
- Mopar 2.875" bearings
- 5/8" Screw in studs with lug nuts
- Strange B1704 steel brake kit for 2.875" Mopar ends $650 for both
Pics are available. Prices do not include shipping.
Call shop. 614-471-1022
[email protected]
2.) MSD Boost Controller PN 7562 $150
- No solenoids or solenoid power harness
- No dome pressure sensor
- These items easily available
3.) Big Stuff 3 Gen 3 Engine Management System $1500
- BS3-004-007
- DAI, DAE
- GM V8
- Complete harness with O2 sensor and serial COMM cable
4.) Complete Rear End Setup $1200 for all
- Competition Engineering Sheet metal Mild Steel housing
- 39 3/4" End to End
- 1/2" Pass offset
- Early Big Ford Ends
- Ladder Bar mount centers 25 3/8" $600
- Moser 35 Spline axles with bearings installed
- 4 3/4" B.C.
- Early Big Ford
- 5/8" screw in studs with lug nuts $250/pair
- Moser 35 Spline steel spool
- PN 5S9F35 $150
- Wilwood Early Big Ford Rear Brake Kit $350
5.) Aeromotive EFI Regulator -10 AN $150
6.) Aeromotive Fuel filter element for -12 AN filter 100 micron $50
7.) Autometer Sport Comp (Black) Monster recall Tach $175
8.) Autometer Sport Comp 2 5/8" Mechanical Gauges $40 each/ $100 takes them all
- 0-100 PSI Oil Pressure
- 0-35 PSI Boost
- 0-280 F Oil Temp
9.) MSD Pro Power Coil PN 8201 $100
10.) Richmond 4.56 12 Bolt 8620 Gear $150
11.) Richmond 5.83 PRO gear. 20 runs since new. $400
13.) Bosch 160 lb/hr low impedance EV1 plug injectors. Set of 8 $600
14.) Billet Atomizer 225 lb/hr injectors. Set of 8 $1000
15.) Aluminum fuel cell. Black. 10 gallons. $175
- 17" x 17" x 9" tall. -10 AN dual outlet. -10 AN vent and return.
- Sender installed
19.) Axles and brakes. Need to go together because calipers brackets are installed on axles
- Strange 35 spline race axles
- for 37 5/8" end to end housing. Centered pinion
- Mopar 2.875" bearings
- 5/8" Screw in studs with lug nuts
- Strange B1704 steel brake kit for 2.875" Mopar ends $650 for both
Last edited:
