Hancock & Lane Engines & Parts Sale

Updated Parts List as of 11/30/2022:

Dailey external oil pumps:

1. Wet-Vac 3-stage pump with 2 vacuum ports: $700 - SOLD
2. NEW 4-stage wet-vac pump with 3 vacuum ports: $1000 - SOLD

Rocker arm systems for SB2 heads: NEW

1. Jesel complete shaft rocker system for SB2 heads; aluminum solid body rockers 1.75 / 1.7 ratio, bars, stands, hardware. Complete kit: $1900
2. T&D complete shaft rocker system for SB2 heads; steel lightweight rockers 1.75 / 1.7 ratio, bars, stands, hardware. Complete kit: $2400

427 LSX engine parts:
Coated pistons, pins, New stef aluminum oil pan and pick-up, beehive valve springs, retainers, keepers, rocker arms, pushrods, hyd. Roller lifters, camshaft: $1800

Wedge Engines:
Record Setting Short-Deck Engine (316 CI) with the best of everything

• 316: Fresh, 0 rums
• Call for more detailed information

PISTONS/ RODS / PINS / RINGS:
SB-2 / used perfect shape / 23 runs:
CP Pistons 4.182 set of 8 / 1.430 c/h
.020 x .020 x 3mm total seal ring set
.927 x 2.250 x .240 wall titanium wrist pins
MGP aluminum rods 5.202 OL x .927 pin with 1.777 bearings included: $1500

CP pistons for Splayed Valve head set of 8 / 4.157 bore x .866 pin diameter with total seal rings: $500
CP pistons for Wedge head 4.165 bore / 1.390 c/h x .927: $400

200 pushrods 3/8" 7.700 to 9.250 lengths: $50 set of 8 or $100 set of 16

Jesel .875 SB-2 tie bar roller lifters dyno time only. Perfect condition: $400

Driveshaft / Chrome moly 51" center to center / 1350 spicer u-joints / 39005-U yoke used one race: $300
5.83 Ford 9-1/2" Gleason Ring and Pinion polished and lightened used / perfect shape: $1300
6.00 Ford 9" ring and pinion US Gear rem finished, cryo'd, lightened / NEW: $800
6.33 Ford 9" Tom's differentials ring and pinion / NEW: $400

Please reach out to if you have any questions.

 

Updated parts list as of 10/24/2022

 

PM sent

 

How many runs does the 5:83 Gleason have on it?

 

There is less than one season on these as they were only used a handful of races, but I'm not sure on the total run count; feel free to give me a call / text and I can send some photos (206) 818-1804.

 

Do you still have any of the Copo engines for sale?

 

No, we have sold all the COPO engines.
Thanks,
Jeff